Why a Proper Strap Fit Matters
A helmet only protects when it stays in place. Loose straps let the helmet shift during a fall, while overly tight straps cause discomfort and may lead your child to take the helmet off. The Banwood Classic Kids Bike Helmet uses a dial-fit adjustment system and an adjustable chinstrap so you can dial in a secure fit that lasts through playground trips and balance bike rides. This guide walks through the adjustment steps using the helmet's built-in features.
Adjusting the Dial-Fit System First
Start with the fit of the helmet shell itself before touching the chin strap. The Banwood helmet has a dial-fit adjustment system at the back. Turn the dial clockwise to tighten or counter-clockwise to loosen until the helmet sits level on your child's head—about one finger-width above the eyebrows. The helmet should not rock side to side or slide forward.
- Check the size range: The Banwood helmet fits head circumferences of 48–53 cm (19–21 inches), which covers most children ages 1 to 8. If your child's head is outside this range, the dial cannot compensate.
- Tighten until snug: Turn the dial so the padding contacts the head evenly. You should feel gentle pressure, not pain. The helmet should stay put when you gently shake the child's head side to side.
Adjusting the Chinstrap
Once the shell fits, move to the chinstrap. The Banwood helmet uses a vegan leather strap with a standard buckle. The strap is adjustable on both sides—look for the sliding adjusters near the ears.
- Position the buckle: Center the buckle under the chin. The strap should form a V shape just below each ear. Slide the adjusters up or down until the V sits snugly without pinching.
- Tighten the strap: Pull the loose end of the strap through the buckle until it is snug. You should be able to fit one finger between the strap and the child's chin. Any looser and the helmet can slide off in a crash.
- Check the Y-junction: The split where the strap divides near the ear should sit just below the ear lobe, not on it. If it rides up, the helmet may lift off the forehead. Adjust the side adjusters to lower the Y-junction.
Final Fit Check
After both adjustments, do a quick shake test: have your child nod and shake their head. The helmet should move with the head, not lag behind. The front edge should remain about two finger-widths above the eyebrows. If the helmet shifts, repeat the dial and strap adjustments. A properly fitted Banwood helmet feels like a natural extension of the head—no gaps, no pressure points.
What the Banwood Helmet Offers for Fit
- BANWOOD HELMET - WHITE (50-54 cm): In-mould ABS hard outer shell, EPS foam liner, vegan leather chin strap, dial-fit adjustment system, adjustable chinstrap. The in-mould construction keeps the helmet lightweight while the dial and strap adjustments let you fine-tune the fit as your child grows.

BANWOOD HELMET - WHITE (50-54 cm) - BANWOOD HELMET - STRIPES (50-54 cm): Same construction and adjustment features as the white version, with a stripes finish. Head circumference 48–53 cm for ages 1–8. The stripes option offers the same secure fit system with a playful look. Both models use the same dial and strap adjustments.

BANWOOD HELMET - STRIPES (50-54 cm)
When to Readjust
Children grow quickly, and a helmet that fit last month may now be loose. Check the fit every few weeks, especially during growth spurts. Also readjust after a crash—even a minor one—because the foam liner may have compressed. The Banwood helmet is CPSC certified for the US market, but only a correct fit ensures that certification works in a real fall.



