How to Attach a Wicker Basket to a Kids' Bike

By Kids Balance Bikes & Bicycles with Wicker Basket | Published: 2026-10-19

Category: How-to Guides

Learn how to attach a wicker basket to your child's bike in a few simple steps. This guide covers tools, positioning, and common mistakes to avoid for a secure fit.

Quick answer

Attach the basket to the handlebars using the included mounting bracket or zip ties, ensuring it is centered and secure without interfering with steering or brakes.

Before you start

Most wicker baskets for kids' bikes, like the Banwood Basket for Classic Bikes, come with a metal mounting bracket and screws. If your basket doesn't include hardware, you can use heavy-duty zip ties as an alternative. Check that your child's bike has a straight handlebar section wide enough for the bracket—banana-shaped or very curved handlebars may need a different mounting approach.

Tools you'll need

You'll need a Phillips head screwdriver, a measuring tape or ruler, and optionally a pair of scissors if you're using zip ties. If your basket uses a bracket, have the screws and washers ready. For a no-tool option, zip ties work but require periodic tightening.

Step-by-step installation

Position the mounting bracket: Slide the metal bracket onto the handlebars, centering it between the stem and the grip. Leave at least 1 inch (2.5 cm) of clearance from the grip so the child's hand can still hold the bar comfortably. Common mistake: placing the bracket too close to the grip, which makes steering awkward.
Secure the bracket: Tighten the screws on the bracket evenly using a screwdriver. Do not overtighten—this can crack the bracket or damage the handlebar finish. If using zip ties, thread them through the basket's back loops and around the handlebars, then pull tight. Checkpoint: after tightening, try to wiggle the bracket. It should not move at all.
Attach the basket to the bracket: Place the basket onto the bracket so that the mounting holes align. Insert the screws through the basket's bottom holes into the bracket and tighten until snug. If your basket has a leather strap, loop it around the handlebar for extra stability. Common mistake: forgetting to align the basket straight. Step back and check that it is level before fully tightening.
Test for clearance: Turn the handlebars fully left and right. The basket should not hit the frame, front wheel, or any cables. If it does, loosen and reposition the bracket slightly toward the center. Checkpoint: the bike's steering must move freely without any rubbing or obstruction.
Final check and load test: Place a light item (like a stuffed toy) in the basket and take the bike for a short test ride. Listen for rattles and watch for any shifting. Tighten any loose screws after the ride. Common mistake: overloading the basket. Stick to lightweight items—a wicker basket is not meant for heavy water bottles or tools.

Product facts

BANWOOD BASKET - CLASSIC BICYCLE: Hand-woven in natural rattan with a leather front panel, designed to fit all Banwood Classic Bikes (14", 16" and 20"). The natural rattan is lightweight, so it won't add much weight to the front of the bike, and the leather panel gives a secure spot for a name tag or decoration.
BANWOOD BASKET - CLASSIC BICYCLE