How to Install a Pin & Ride Basket on a Bike

Quick answer

Attaching a Banwood Pin & Ride Basket is a simple, tool-free process. You just need to align the basket's mounting bracket with your bike's handlebars or frame, snap it into place, and secure the straps.

Step-by-Step Installation

1. 1. Prepare the Mounting Area: Clean the handlebars or frame section where the basket will attach. Remove any dirt or debris to ensure the straps grip firmly. A common mistake is skipping this step, which can cause the basket to slip.
2. 2. Position the Bracket: Slide the mounting bracket over the handlebars or frame tube. Center it so the basket will sit evenly. For handlebar mounts, keep it away from grips and brake levers to avoid interference. Check that the bracket does not block any controls or the steering range.
3. 3. Secure the Straps: Thread the straps through the bracket slots and pull them tight. Fasten the buckle and pull the loose end to cinch. A common mistake is leaving the straps loose, which leads to wobbling. Tighten until the bracket does not shift when you push it.
4. 4. Snap on the Basket: Align the basket's mounting clips with the bracket and press down until you hear a click. Give the basket a gentle tug to confirm it is locked. If it feels loose, recheck the bracket position and strap tightness. Test the basket by placing a light item inside and riding slowly to check for any movement.

Product Facts

• BANWOOD PIN & RIDE BASKET - DEEP SEA: Made from eco-friendly materials, the Pin & Ride Basket is perfect for bringing along all their favourite things, from small toys to little treasures found along the way. The eco-friendly construction is durable enough for daily use, and the open design lets kids see and access their items easily.