How to Assemble a Banwood Scooter & Helmet Set

Quick answer

To assemble your Banwood ECO Scooter & Helmet Set, attach the handlebar to the scooter deck, adjust the handlebar height, and fit the helmet straps. The entire process takes about 10 minutes and requires only a Phillips screwdriver.

Assembly steps

1. 1. Unpack and lay out parts: Remove the scooter deck, handlebar, helmet, and any small hardware from the box. Place the scooter deck on a flat, stable surface. Check that you have the handlebar clamp and screws. Keep the hardware together—losing a screw can delay assembly.
2. 2. Loosen the handlebar clamp: Use a Phillips screwdriver to loosen the screw on the handlebar clamp located on the scooter deck. Do not remove the screw completely; just loosen it enough to slide the handlebar in. Over-tightening the clamp before inserting the handlebar can strip the threads or damage the clamp.
3. 3. Insert and adjust the handlebar: Slide the handlebar into the clamp until it reaches the desired height. For most children, the handlebar should be at waist height when standing on the deck. Tighten the clamp screw firmly but not excessively. A handlebar that is too low can cause the child to hunch; too high can affect steering control.
4. 4. Fit the helmet: Place the Banwood helmet on your child's head. Adjust the rear dial for a snug fit—the helmet should not rock side to side. Buckle the chin strap so that one finger fits between the strap and the chin. A helmet that is too loose can shift during a fall; too tight can cause discomfort and discourage use.
5. 5. Final safety check: Rock the scooter gently to ensure the handlebar is secure. Check that the helmet strap is fastened and the helmet sits level on the head. Test the scooter brakes (if equipped) before the first ride. Repeat this check after the first few rides, as screws can settle and require re-tightening.

Product facts

• BANWOOD ECO SCOOTER & HELMET SET - TEAL: The BANWOOD ECO SCOOTER & HELMET SET - TEAL is a Banwood pack that pairs a scooter with a helmet in a teal colorway. Since the scooter and helmet are sold together, you don't need to buy accessories separately—just assemble and ride.